Screening Bucket HR Screening Bucket
Disposing of Debris with a Single Hydraulic Excavator
Simply attach it to a hydraulic excavator, and you can start disposing of debris immediately. The same level of processing as a large crusher can be achieved even without extensive space available. This attachment enables scooping, crushing, and loading operations to be performed with a single hydraulic excavator.
Just hold it down with a crush bar to crush debris.
Special steel is used for the crushing teeth. Large debris is crushed by holding it down with a crush bar, and two eccentrically rotating crushing teeth can pulverize material down to 40 millimeters or smaller. Grease only needs to be applied in two places, ensuring ease of maintenance.
SPEC
| Model Name | Class of excavator[ton] | Operating pressure[MPa] | Bucket width A[mm] | Bucket length B[mm] | Crushing axis width C[mm] | Processing capacity[ton/h] | Mass[kg] |
|---|---|---|---|---|---|---|---|
 HR-122 | 12 – 14 | 27.4* | 870 | 1410 | 425 | 10～35 | 1640 |
 HR-202 | 20 – 22 | 27.4* | 1110 | 1620 | 600 | 20～60 | 2490 |
* Note on operating pressure: Built-in relief valve.
･ Single two-way hydraulic piping is required. (However, drain piping is required when the back pressure is 3.4 MPa. or higher.)
･ The attachment cannot be installed on a hydraulic excavator of a different class.
MOVIE
Product Demo | Screening Bucket Himawari | HR-200 | Debris Processing Video
